EAW CAM150 User Manual download pdf (Page 19)

250

800-416-5090

SYMETRIX

581E Distribution Ampliﬁ er

The 581E is a very ﬂ exible distribution ampliﬁ er with 4 balanced inputs and 16 bal-

anced outputs. The one input, four output sections are independent of each other,

but can be combined to accommodate stereo sources or route a single mono source to

all 16 outputs. A 4 LED level meter on each input assists in setting up ideal input and

output operating levels, each of which can be controlled individually.

• Ideal for Broadcast, Installed Sound and Post Production

• Very low noise, high performance audio distribution ampliﬁ er

• Flexible 4 input 16 output routing capabilities

• All inputs and outputs on balanced detachable terminal blocks

• Input and output level individually controlled

Distribution Ampliﬁ ers

#SY581E

499

ASHLY

4.24D

The 4.24D combines a ﬂ exible 4 x 8 distribution

ampliﬁ er and powerful audio processing capa-

bilities into a single-spaced unit with all balanced

Euroblock I/O. Each input has gain controls,

high/low shelf ﬁ lters, 6-band parametric EQ, and

can be assigned to any output. Each output sets the

crossover frequencies, has a programmable 4-band

parametric EQ, high/low shelf ﬁ lters, output gain,

and a compressor/limiter for speaker protection.

Programming is simple; connect to a Windows PC

and utilize the included system software for your

own conﬁ guration.

• 4 x 8 Audio Distribution Processor

• Inputs can be assigned to any output and utilize

built-in DSP

• Crossover, EQ, delay and limiter functions

• LED indicators for signal and clip/limiter

• Euroblock connectors with 80-260V operation

APHEX

120A

The 120A by

Aphex is an

easy-to-oper-

ate distribution

ampliﬁ er that

effectively routes a single input to four outputs. Connections are made via servo-bal-

anced XLR connectors and its simple control panel provides individual output level

controls and a signal/clip LED indicator. The wide frequency response of the unit helps

maintain the audio performance quality with little or no noise or coloration.

• Ideal for any application requiring transparent routing of audio signals

• 1 x 4 distribution ampliﬁ er with individual level control

• Compact, rugged half-rack design allows both portability and convenience

• Wide dynamic range and frequency response with maximum gain before noise level

• Servo-balanced XLR input and outputs

INTER-M

PO-9106

The PO-9106 from Inter-M features a single line-level XLR input and 6 line-level XLR

outputs, giving you the ability to distribute a single audio signal to multiple balanced

outputs. The front panel features independent level controls and peak warning lights

for each channel. Inter-M has included a 24VDC battery connection for remote ﬁ eld

use.

• Transformer-isolated balanced XLR outputs

• Electronically balanced XLR input • Level control on every channel

• LED peak lights • Occupies a single rack space

#AS4.24D

1580

#AP120A

279

#SY581E

324

ATI AUDIO

DA 1008-1

The DA 1008-1 is a professional 1-in/8-out distribu-

tion ampliﬁ er designed to provide up to 26dB of

balanced output, free of hum and RF interference.

Its higher output, low-noise performance is capable

of driving longer lines, eliminating frequency rolloff

and distortion from mismatched load impedances.

The unit provides an input clipping LED and level

LED meter with three selectable 0VU settings,

allowing you to set nominal line levels and monitor

peak headroom.

• 1 x 8 distribution ampliﬁ er with 26dB of gain

• Professional quality audio for audio/video

installations • Front-panel headphone jack,

metering or auxiliary ninth output

• Actively balanced outputs with LED output clipping

indicator • Superior RF and hum protection with

full short circuit isolation

• Reliable barrier block connectors for easy servicing

#ATDA10081

988

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 33 34

Comments to this Manuals

No comments

EAW CAM150 User Manual Page 19

Comments to this Manuals

Related products and manuals for Audio amplifiers EAW CAM150