Eaw DSA250 & DSA230 User Manual download pdf (Page 6)

1.2.1 GENERAL PRECAUTIONS

1. Read and Follow Instructions — Before installing and operating this loudspeaker,

read and follow all instructions and safety precautions in this manual and on

the loudspeaker. Retain them for future reference.

2. Ventilation — The sides and rear of the enclosure form the heat sink for the

internal amplifiers and may reach high temperatures during use. As such,

adequate ventilation is required to ensure proper operation. Allow a minimum

of 2 inches of clearance between the enclosure and adjacent surfaces so as not

to impede the flow of air past the sides and rear surfaces. Also, locate the

loudspeaker away from heat sources such as radiators or other devices that

produce heat. If the enclosure is in a grille-covered recess, forced air ventilation

may be required.

3. AC Mains — Connect this loudspeaker only to a nominal 115 V or 230 V AC

Mains supply as described in this manual. Before applying AC power, ensure

the AC Mains voltage rating on the loudspeaker matches the nominal AC Mains

voltage being supplied: 115 V or 230 V, 50 Hz or 60 Hz.

DANGER: DO NOT APPLY 230 V MAINS POWER IF THE VOLTAGE RATING

ON THE LOUDSPEAKER IS 115 V. IMMEDIATE AND CATASTROPHIC

DAMAGE TO THE LOUDSPEAKER WILL RESULT AND MAY CAUSE A FIRE

HAZARD, SERIOUS PERSONAL INJURY, OR DEATH.

4. Object and Liquid Entry — Take care that objects do not fall into and liquids

are not spilled into the loudspeaker.

5. Servicing — Do not attempt to service this loudspeaker. All service or repair

should be referred to the EAW Service Department or your EAW Distributor.

6. Damage Requiring Service — Only qualified service personnel should service

this loudspeaker if one or more of these conditions occur:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has spilled into the loudspeaker.

C. The loudspeaker has been exposed to rain.

D. The loudspeaker does not appear to operate normally or exhibits a marked

change in performance.

E. The loudspeaker has been dropped, or its chassis damaged.

7. Grounding or Polarization — Do not defeat the electrical grounding means

provided for this loudspeaker.

1 2 3 4 5 6 7 8 9 10 11 ... 43 44

No comments

Eaw DSA250 & DSA230 User Manual Page 6