Eaw D S A 2 3 0 User Manual download pdf (Page 10)

2. Attach the Wall Brackets to structure. You must provide attachment

hardware and ensure the attachment method and structure are

capable of supporting the intended load. Position the Wall Bracket

weld nuts left or right to allow clearance for later insertion of the

Retainer Bolt.

3. Ensuring they are oriented properly, install the two Enclosure

Brackets on the loudspeaker. Insert and hand-tighten the supplied 3/8-16

Enclosure Bracket Bolt and Lock Washer for each Enclosure Bracket.

4. Lift the enclosure onto the installed Wall Brackets.

WARNING: Use at least two people for lifting enclosure onto the

brackets.

5. Insert and snugly tighten at least one of the supplied 1/4-20 Retainer

Bolt and Lock Washer through the side of either of the Wall and

Enclosure Brackets. This prevents the enclosure from being lifted off

the Wall Brackets.

6. Securely tighten each 3/8-16 Enclosure Bracket Bolt to lock the

enclosure at the desired horizontal angle.

3.7 Signal Processing

The vertical coverage is determined by programming the loudspeaker’s

digital signal processing.

Use the DSAPilot to determine the desired coverage. The DSAPilot calculates

and optimizes the signal processing required to achieve the desired results.

High pass/low pass filters, parametric EQ, delay, and gain are user adjustable

for each of the two inputs.

1/4-20 X 3 LG

HEX HEAD

RETAINER BOLT

& LOCK WASHER

2X 3/8-16 X 2 LG

BLACK HEX HEAD

ENCLOSURE BRACKET

BOLT & LOCK WASHER

2X ENCLOSURE

BRACKET P/N 0006118

2X WALL BRACKET

P/N 0006119

Figure 3.6.2a Bracket Installation

Figure 3.6.2b Installed Bracket

Figure 3.7 DSAPilot Main Screen

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 43 44

No comments

Eaw D S A 2 3 0 User Manual Page 10