EAW UX3600 Owner's Manual download pdf (Page 9)

4 UX3600 INSTALLATION

4 . 1 P h y s i c a l I n s t a l l a t i o n

CAUTION: The UX3600’s operating temperature range is 32 F to 104 F degrees / 0 C to 40 C

degrees. The UX3600 may not function properly in temperatures below this range and may be

damaged in temperatures above this range.

4.1.1 MOUNTING

The UX3600 is designed to mount in a standard, 19 in equipment rack occupying one EIA rack space

(1.75 in). When rack mounting, use screws with mating plastic washers to help protect the finish of the

UX3600. The UX3600 weighs approximately 9.5 lb / 4.3 kg.

4.1.2 VENTILATION

Side ventilation holes on the UX3600 should be left

unobstructed when installed.

It is recommended to leave one empty rack space above

the UX3600 to provide 1.75 in / 45 mm clearance above

the top.

4 . 2 AC M a i n s C o n n e c t i o n s

4.2.1 AC MAINS VOLTAGE

The UX3600 has a universal, auto-ranging power supply that operates from 100 V to 240 V, 50 Hz to 60

Hz. The UX3600 is compatible with these nominal AC Mains:

100 V, 110 V, 115 V, 120 V, 127 V, 220 V, 230 V, and 240 V at 50 Hz to 60 Hz.

CAUTION: To maintain compliance ratings, keep the AC Mains voltage between 100 V to 240 V.

4.2.2 IEC POWER CORD RECEPTACLE

An IEC-320 AC Mains inlet on the rear panel accepts the detachable power cords supplied with the

unit. Use the power cord appropriate for these nominal AC Mains supply voltages.

120 V AC Mains: use the power cord with the NEMA 5-15 plug, EAW part # 640-01-00

220 V AC Mains: use the power cord with the Schuko plug, EAW part # 640-02-02

CAUTION: It is the user’s responsibility to provide a proper AC Mains plug for any

AC Mains outlet configuration that differs from those supplied with the product.

4.2.3 GROUNDING

The chassis of this product is grounded through the grounding conductor of the power cord. To avoid

electric shock, plug the power cord into a properly wired and grounded receptacle before making any

connections to or operating the product.

DANGER: This equipment must be operated with the power cord grounding conductor

connected to a properly grounded AC outlet. Do not disconnect, “lift,” or otherwise remove this

ground connection. Without this connection, accessible parts, including knobs and controls that

may appear to be insulated, can render an electric shock that can cause injury or death to

operating personnel.

Page 5

MAINTAIN 1 in [25 mm] CLEARANCE

AROUND SIDE

AIR INTAKE

GRILLES

MAINTAIN

1 in [25 mm] CLEARANCE

AROUND SIDE AIR INTAKE GRILLES

VENTILATION CLEARANCES

~100-240 VAC

50-60Hz 75W

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Comments to this Manuals

No comments

EAW UX3600 Owner's Manual Page 9

Comments to this Manuals

Related products and manuals for Processors EAW UX3600