Eaw UX8800 User Manual download pdf (Page 16)

4.3 Audio Connections

4.3.1 SIGNAL CABLE

Use a good quality, 2-conductor shielded cable for all audio input and output connections.

4.3.2 INPUT CONNECTIONS

The four, female, XLR-type connectors labeled Athrough D are audio input connectors.

NOTES:

1. Select the signal type, analog or AES/EBU, in the hardware Utilities menu or

EAWPilot/UX8800 settings window.

2. XLR connector B is inactive when AES/EBU is selected for XLR connector A & B.

3. XLR connector D is inactive when AES/EBU is selected for XLR connector C & D.

Analog Pin-Out: XLR A to XLR D

Electronically balanced, line level

Pin 1: Shield

Pin 2: + (plus or high)

Pin 3: - (minus or low)

AES/EBU Pin-Out: XLR A and XLR C

Transformer isolated, balanced.

Pin 1: Signal ground (shield)

Pin 2: Channel 1

Pin 3: Channel 2

4.3.3 OUTPUT CONNECTIONS

The eight, male, XLR-type connectors labeled 1 through 8 are the audio output connectors.

Analog: XLR 1 to XLR 8

Electronically balanced, line level.

Pin 1: shield

Pin 2: + (plus or high)

Pin 3: - (minus or low)

4.4 Network Connections

4.4.1 ETHERNET

The UX8800 communicates with a computer through its built-in, front panel, Ethernet port. This port is

configured as a standard NIC (network interface card). The UX8800 can be connected to an Ethernet

network using hub, switch, router, or wireless connections.

Cable: 8 conductor CAT-5 or better

Mating Connector: RJ-45 male

Wiring Configuration: Standard for connection to a network hub, switch, or router

Crossover type for direct connection to a computer’s NIC

Page 6

ETHERNET

U-NET

ANALOG

PUSH

ANALOG/AES

PUSH

D C

ANALOG

PUSH

1 Shield

2+3- 2+ 3-

2 Signal

1 Signal Earth

(cable shield)

3 Signal

1 Shield

OUTPUT (analog) INPUT (analog) INPUT (digital - AES/EBU)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

Comments to this Manuals

No comments

Eaw UX8800 User Manual Page 16

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Eaw UX8800