Eaw UX8800 User Manual download pdf (Page 20)

5.2.4 INPUT CHANNELS: BUTTONS A TO D

Pressing an INPUT channel button will illuminate the button and the display screen will display the

selected function’s parameters for this input. This action will also illuminate

the buttons for any output channels to which this input’s audio is routed.

5.2.5 OUTPUT CHANNELS: BUTTONS 1 TO 8

Pressing an OUTPUT button will illuminate the button and the display screen will display the selected

function’s parameters for this output.

This action will not illuminate the

input button routing audio to this

output.

5.2.6 MUTE BUTTONS

Input Mutes: Mutes the output signal of the corresponding Input Channel.

This does not mute the U-Net output.

Output Mutes: Mutes signal to both the output XLR and U-Net output.

Mute settings are not saved with and therefore not recalled from Program files saved in the processor’s

memories. However, the behavior of the mutes may be changed when a program is recalled according to

the Program Load setting made in the UTIL menus.

In contrast, mute settings are saved as part of EAWPilot files (*.ept files) and are uploaded to the processor

as part of the settings stored in those files.

5.3 UTIL (System Set-Up)

The UTIL function menu items are the global parameters for the processor. Set these parameters first.

5.3.1 DEVICE NAME

Enter a unique name for the processor, up to 16 alphanumeric characters.

5.3.2 MODE

Select the operating mode. When changing processor modes all settings will be reset to the factory default

settings for that mode. In order to avoid losing any custom settings, save them using the PROG function

before switching modes. During the mode change, the processor reboots itself and mutes all outputs.

System Processor The processor functions as a standard digital signal processor.

Loudspeaker Processor The processor functions using factory set “Greybox” settings for

particular EAW loudspeaker products.

5.3.3 INPUTS A&B / INPUTS C&D

Select the signal, Analog or AES (=AES/EBU), for Inputs A&B and Inputs C&D. The sample rate for the

AES signal can be 44.1 kHz, 48 kHz, 88.2 kHz, or 96 kHz. The sample-rate converter in the UX8800 will

convert the input sample rates to 48 kHz sample rate required for its internal processing.

NOTE: Input connector B is disabled when digital is selected for Inputs AB and Input connector D is

disabled when digital is selected for Inputs CD.

5.3.4 TEMPERATURE

Enter the ambient temperature. This value is used to calculate the displayed delay distances. These

distances depend on the speed of sound, which depends on the temperature of the air through which the

sound passes. The temperature is adjustable in one degree increments between 32 F degrees and 104 F

degrees or 0 C degrees to 40 C degrees, depending on the Units setting. In Loudspeaker Processor mode,

the temperature is also used to calculate the air loss pre-emphasis.

Page 10

INPUT CHANNELS

OUTPUT CHANNELS

12345678

INPUTS

Clip

-6

-12

Sig

Clip

-6

-12

Sig

Clip

-6

-12

Sig

Clip

-6

-12

Sig

MUTE MUTE MUTE MUTE

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 39 40

Comments to this Manuals

No comments

Eaw UX8800 User Manual Page 20

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Eaw UX8800