EAW DX810 Instruction Manual download pdf (Page 19)

DX810 – 19

Button Section

The Button Section includes the assignment

buttons (Force Ctrl, Logic In, Logic Out, Groups,

Input Proc, Out Proc, Mute Ind) and the DSP

buttons (Combine, Input EQ, Output EQ, Compress,

Gate, Delay, X-Over).

Assignments

Force Ctrl

Click this button to open the Force Control window.

Input Name:

Enter a name for each channel

with the keyboard. It will accept up to 32 characters.

Force On Level:

Assign a force-on level to each

input, from OFF to +10 dB. Click and drag in the

Force On Level box to change the force-on level

setting. The force-on action is always relative to the

current mix level.

Activate:

Choose between Logic In or Gate to

activate the Force On or Force Off function. When

Logic In is selected, an input can be forced on or

forced off by configuring the Logic Input window, or

by a remote control configured to force on or off an

input. When Gate is selected, an input can be

forced on or forced off when its Gate is open.

Force On Priority:

Assign a priority level from 1

(highest) to 8 (lowest) for each channel’s force-on

function. The default setting is None. A higher priority

input can force on or off a lower priority input to its

assigned relative force-on or force-off level (see next).

Force Off Level:

A force-off level to each input

can be adjusted from OFF to +10 dB. Click and drag

in the Force Off Level box to change the force-off

level setting. The force-off action is always relative

to the current mix level (e.g., a 0 dB force-off level

means the level will not change).

Grp Name:

Enter a name for each group with

the keyboard. It will accept up to 32 characters.

Priority:

Assign a priority level from 1 (highest)

to 8 (lowest) for each group. The default setting is

None. Assigning priority to groups is useful if you

need to have, for example, a paging microphone

force off background music in some zones, but not

in others. In this case, assign the paging mic input

to a Control Group with Priority 1 level, and a

Control Group of designated outputs a Priority 2 or

lower level. Note that Input Priority and Group

Priority are separate functions, and the force-off

level for groups is completely off.

Logic In

Click this button to open the Logic Input window.

Make the following settings and assignments in the

Logic Input window:

Name:

Enter a name for each Logic Input, up to

32 characters.

Function:

Select one of 8 different functions in

this drop-down box. The functions include Inactive,

Force-on, Force-off, Mute Input, Mute Output,

Mute Group, Preset Recall, and Combine.

Action:

Select whether the particular

function selected is momentary, latch

on, latch off, or toggling. The selections

will vary depending on the function

selected for the Logic Input.

Affected I/O:

Select the Input,

Output, or other parameter that is

affected by the Logic function. The

selections will vary depending on the

function and action selected for the

Logic Input.

See Appendix A for a chart of the

Logic Input functional combinations

available.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

Comments to this Manuals

No comments

EAW DX810 Instruction Manual Page 19

Comments to this Manuals

Related products and manuals for Processors EAW DX810