EAW DX810 Instruction Manual download pdf (Page 20)

20 – DX810

Logic Out

Click this button to open the Logic Output window.

Make the following settings and assignments in the

Logic Output window:

Name:

Enter a name for each Logic Output, up

to 32 characters.

Function:

Select one of 10 different functions in

this drop-down box. These functions include

Inactive, Input/Mute Enable, Output Signal Present,

Preset Active, Output/Mute Enable, Group/Mute

Enable, Force On, Priority Active, Combine Active,

and Gate Status.

Parameter:

Select the input, output, or other

parameter that is monitored by the Logic Output.

The selections will vary depending on the function

selected for the Logic Output.

Condition:

Displays the particular condition that

must be satisfied for the Logic Output to become

active. The condition will vary depending on the

function and parameter selected for the Logic Output.

See Appendix B for a chart of the Logic Output

functional combinations available.

Groups

Click this button to view group assignments for

crosspoints and outputs. The gain readout boxes

change and display the assigned group for the

crosspoint or output. This is true of the Crosspoint

Matrix and Output Sections.

Tip: If you have an input and output turned up,

but you are not hearing the signal in the output,

check to see if that input or output (or crosspoint) is

assigned to a group by clicking this button. If it is, and

the group fader is turned down, you won’t get a signal!

Input Proc

Click this button to view the processors (Gate,

Compressor, Input EQ) that are active for each input

(over the Crosspoint Matrix Section). Lit buttons

show processors that are turned on. Click the

buttons to turn the processors on and off for each

individual input. Ctrl+click on a button to open the

processor window and make adjustments.

Out Proc

Click this button to view the processors that are

active for each output (over the Crosspoint Matrix

Section). These processors include Output EQ, X-

Over, Delay, and Compressor. Lit buttons show

processors that are turned on. Click the buttons to

turn processors on and off for each individual

output. Ctrl+click on a button to open the processor

window and make adjustments.

Note that if two or more outputs are linked via

the Crossover window, only one button appears.

This is true of the Output EQ (Graphic or Parametric),

X-Over, and Delay output processors, as shown in

outputs A through E in the previous output

processor view.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

Comments to this Manuals

No comments

EAW DX810 Instruction Manual Page 20

Comments to this Manuals

Related products and manuals for Processors EAW DX810